How do I use the colour Antic Pearl by Magic Paint?

The use is very simple:

The first step is to degrease well the surface you want to paint with hot water, ammonia and bicarbonate, (in a litre of water put 3/4 tablespoons of bicarbonate and a cap of ammonia, if you are allergic to ammonia you just need water and bicarbonate). These are the only products that clean the surface well without leaving traces.
Once dried the surface can proceed with painting. You open the jar, mix well and proceed with the first coat very stretched, (avoid leaving drips on the edges because at the end of the work would not be aesthetically beautiful). Let the surface dry well before proceeding with the third step (it is understood to be dry when the surface is hot when the hand is placed on it. Drying times depend on the environment in which you are and the season)
The second coat completely covers the surface, so you will no longer see the colour underneath. If the first coat has already been very opaque, the second coat can be diluted with 10/15% water. Let it dry well.
You can now pass the Antic pearl colour, if you pass it with a drain brush you will only give a pearly glaze, otherwise if given intense you will have a very talkative covering effect.
Finally, depending on the piece of furniture, it is recommended to protect with wax (bedside tables, drawers, wardrobes, low-wear furniture) or with the liquid protective agent (kitchens, chairs, tables, doors, high-wear furniture).N.B.: The protective agent should always be diluted with about 10/15% of water.

Magic Paint colore “Antic Pearl”

I always remind you that on our youtube channel and on our facebook page there are many tutorials on the use of all Magic Paint products: